asm6809(1)                  General Commands Manual                 asm6809(1)



NAME
       asm6809--6809 cross-assembler

SYNOPSIS
       asm6809 [OPTION]... [SOURCE-FILE]...

DESCRIPTION
       asm6809 is a portable macro cross assembler targeting the Motorola 6809
       and  Hitachi  6309  processors.  These  processors  are  most  commonly
       encountered in the Dragon and Tandy Colour Computer.

OPTIONS
       -B, --bin
              output raw binary file (default)

       -D, --dragondos
              output DragonDOS binary file

       -C, --coco
              output CoCo RS-DOS ("DECB") segmented binary file

       -S, --srec
              output Motorola SREC file

       -H, --hex
              output Intel hex record file

       -e, --exec addr
              EXEC address (for output formats that support one)

       -8, -9, --6809
              use 6809 ISA (default)

       -3, --6309
              use 6309 ISA (6809 with extensions)

       -d, --define sym[=number]
              define a symbol

       --setdp value
              initial value assumed for DP [undefined]

       -o, --output file
              output filename

       -l, --listing file
              create listing file

       -s, --symbols file
              create symbol table

       -q, --quiet
              don't warn about illegal (but working) code

       -v, --verbose
              warn about explicitly inefficient code

       --help show help

       --version
              show program version

       If more than one SOURCE-FILE is specified, they are assembled as though
       they were all in one file.

USAGE
       Text is read in and parsed, then as  many  passes  are  made  over  the
       parsed  source as necessary (up to a limit), until symbols are resolved
       and addresses are stable. The fastest or smallest representation should
       always be chosen where there is ambiguity.

       Output  formats are: Raw binary, DragonDOS binary, CoCo RS-DOS ("DECB")
       binary, Motorola SREC, Intel HEX.

       Home page: <http://www.6809.org.uk/asm6809/>

   Differences to other assemblers
       Motorola syntax allows a comment to follow any operands, separated from
       them only by whitespace. To an extent, this assembler accepts that, but
       be aware that as spaces are allowed within expressions, if the  comment
       looks like it is continuing an expression it will generate bad code (or
       raise an error if the result is syntactically incorrect). Example:

              0000  8605                  lda     #5
              0002  C60A                  ldb     #5 * 2  twice first number

       A strict Motorola assembler would generate bytes C6 05 for  the  second
       line,  as  the  "*  2" would be ignored. For consistency, it is best to
       introduce end of line comments with a ; character. An asterisk (*)  can
       introduce whole line comments.

       An  unquoted  semicolon always introduces a comment. The alternate form
       of the 6309 instructions AIM, OIM, etc. listed  in  some  documentation
       that uses a semicolon as a separator is not accepted.

       A  symbol  may be forward referenced; any time a reference is unresolv-
       able, another pass is triggered, up to some defined maximum.

       In 6809 indexed addressing, the offset size will default to the fastest
       possible  form,  e.g.  if  the  offset is an expression that happens to
       evaluate to zero, the no offset form will be used. Prepend << to coerce
       a 5 bit offset, < to coerce 8 bits or > to coerce 16 bits.

       asm6809  currently  has  no support for OS-9 modules or multiple object
       linking.

   Program syntax
       Program files are considered line by line. Each  line  contains  up  to
       three  fields,  separated  by  whitespace: label, instruction and argu-
       ments. An unquoted semicolon (;) indicates that the rest of the line is
       to  be considered a comment. Whole line comments may be introduced with
       an asterisk (*). Motorola-style end of line comments without  a  ;  are
       accepted, but see the notes about assembler differences.

       Any  label must appear at the very beginning of the line. If a label is
       omitted, whitespace must appear  before  the  operator  field.  Certain
       pseudo-ops  may  affect  a label's meaning, but usually labels define a
       symbol referring to the current position in the code (Program  Counter,
       or PC).

       The   instruction   field   contains   either  an  instruction  op-code
       (mnemonic), a pseudo-op (assembler directive),  or  a  macro  name  for
       expansion.

       Pseudo-ops  allow conditional assembly and inline data, can affect code
       placement and symbol values  and  be  used  to  include  further  files
       inline. See the section on Pseudo-ops for more information.

       Arguments  are  a  comma-separated list: either instruction operands or
       arguments to a pseudo-op or macro. Permitted arguments are specific  to
       the instruction or pseudo-op, but in general they may be:

       o An expression.

       o A register name, with optional pre-decrement or post-increment.

       o A  nested  list surrounded by [ and ]. This is generally only used to
         indicate indirect indexed addressing.

       In addition, any argument may be preceded by:

       o #, indicate immediate value.

       o <<, force 5-bit index offset.

       o <, force direct addressing, 8-bit value or 8-bit index offset.

       o >, force extended addressing, 16-bit value or 16-bit index offset.

   Expressions
       Expressions are formed of:

       o A decimal number.

       o An octal number preceded by @.

       o A binary number preceded by % or 0b.

       o A hexadecimal number preceded by $ or 0x.

       o A floating point number: decimal digits surrounding exactly one  full
         stop (.).

       o A  single  quote  followed by any ASCII character (yielding the ASCII
         value of that character).

       o A symbol name, local forward reference or local back reference.

       o Any of the above prefixed with a unary minus (-) or plus (+).

       o A string delimited either by double quotes or /.

       o A combination of any of the above with arithmetic,  bitwise,  logical
         or relational operators.

       o Parenthesis to specify precedence.

       The  assembler  uses  multiple  passes  to  resolve  expressions. If an
       expression refers to a symbol that cannot  currently  be  resolved,  an
       extra  pass  is  triggered.  Similarly, if a symbol is assigned a value
       (e.g. by an EQU pseudo-op) that differs to its value  on  the  previous
       pass, another is triggered until it becomes stable.

       When not directly used for their contents (e.g. by FCC), strings can be
       used in place of integer values. The ASCII value of each  character  is
       used to represent 8 bits of the integer result up to 32 bits. Example:

              0000  CC443A                ldd     #"D:"

   Operators
       The  following  operators  are available, listed in descending order of
       precedence (where operators share a precedence,  left-to-right  evalua-
       tion is performed):

               Operator  | Description
              -----------+----------------------
                  +      | unary plus
                  -      | unary minus
                 ! ~     | logical, bitwise NOT
              -----------+----------------------
                  *      | multiplication
                  /      | division
                  %      | modulo
              -----------+----------------------
                  +      | addition
                  -      | subtraction
              -----------+----------------------
                  <<     | bitwise shift left
                  >>     | bitwise shift right
              -----------+----------------------
                 < <=    | relational operators
                 > >=    | relational operators
              -----------+----------------------
                  ==     | relational equal
                  !=     | relational not equal
              -----------+----------------------
                  &      | bitwise AND
              -----------+----------------------
                  ^      | bitwise XOR
              -----------+----------------------
                  |      | bitwise OR
              -----------+----------------------
                  &&     | logical AND
              -----------+----------------------
                  ||     | logical OR
              -----------+----------------------
                  ?:     | ternary operator

       Division always returns a floating point result. Other arithmetic oper-
       ators return integers if both operands are integers, otherwise floating
       point. Bitwise operators and modulo all cast their operands to integers
       and return an integer. Relational and logical operators result in 0  if
       false,  1  if  true. Integer calculations are performed using the plat-
       form's int64_t type, floating point uses double.

   Conditional assembly
       The pseudo-ops IF, ELSIF, ELSE and ENDIF guide conditional assembly. IF
       and  ELSIF  take one argument, which is evaluated as an integer. If the
       result is non-zero, the following code will be assembled, else it  will
       be  skipped.  Undefined symbols encountered while evaluating the condi-
       tion are interpreted as zero (false) rather than raising an error.

       Conditional assembly pseudo-ops are permitted within macro  definitions
       and  will  be  evaluated at the time of expansion, therefore positional
       variables can be used to affect macro expansion.

   Sections
       Code can be placed into named sections with the SECTION pseudo-op. This
       can  make  breaking  source into multiple input files more comfortable.
       Without ORG or PUT directives, sections will follow each other in  mem-
       ory in the order they are first defined.

       Within  each  section,  there may exist multiple spans of discontiguous
       data. Certain output formats are able to represent this, for the others
       (e.g.  DragonDOS),  the spans are combined first, with the gaps between
       them padded with zero bytes.

   Local labels
       Local labels are considered local to the current section. A local label
       is any decimal number used in the label field, and the same local label
       may appear mulitple times, unlike other labels.

       As an operand, a decimal number followed by B or F is considered to  be
       a  back or forward reference to the previous or next occurrence of that
       numerical local label in the section.

       In this example, the 1 label occurs twice, but each use of 1B refers to
       the closest one searching backwards:

              0000  8E0400    scroll      ldx     #$0400
              0003  EC8820    1           ldd     32,x
              0006  ED81                  std     ,x++
              0008  8C05E0                cmpx    #$05e0
              000B  25F6                  blo     1B
              000D  CC6060                ldd     #$6060
              0010  ED81      1           std     ,x++
              0012  8C0600                cmpx    #$0600
              0015  25F9                  blo     1B
              0017  39                    rts

       An  exclamation mark (!) in the label field is treated as a local label
       numbered zero. Operands of < and > are considered equivalent to 0B  and
       0F  respectively, and can therefore refer to the ! local label. This is
       included for compatibility with other assemblers.

       As local labels can be repeated, their position is used to  distinguish
       them.  For  this  reason,  all file inclusions and macro expansion must
       occur during the first pass so that the absolute line  count  at  which
       each local label is encountered remains the same between passes.

   Macros
       Start  a  macro  definition  by  specifying  a name for it in the label
       field, and MACRO in the instruction field. Finish the  definition  with
       ENDM in the instruction field.

       Use  a macro by specifying its name in the instruction field. Any argu-
       ments given will be available during expansion as  a  positional  vari-
       able.

       Positional variables can be used within strings, or pasted to form sym-
       bol names. In either case, they must be quoted or they will  be  passed
       by  value,  which  will result in an error if they do not correspond to
       valid symbols by themselves.

       The positional variables are referred to with \{1},  \{2},  ...,  \{n}.
       For  the  first nine arguments, the braces are not required, so \1, \2,
       ..., \9 are valid alternatives. For compatibility  with  the  TSC  Flex
       assembler,  another  form  is accepted: &{1}, &{2}, ..., &{n}. Within a
       string, the shorter &1, &2, ..., &9 is still valid, but as this can  be
       confused with bitwise AND, it is not permitted elsewhere.

       Here's  a  silly  example demonstrating positional variables and symbol
       pasting. Consider the following macro definition and utilising code:

              go_left         equ     -1
              go_right        equ     +1
              move            macro
                              lda     x_position
                              adda    #go_\1
                              sta     x_position
                              endm
              do_move
                              move    "right"
                              rts
              x_position      rmb     1

       The main code generated is as follows:

              0000            do_move
              0000                        move    "right"
              0000  B60009                lda     x_position
              0003  8B01                  adda    #go_\1
              0005  B70009                sta     x_position
              0008  39                    rts

   Pseudo-ops
       Conditional assembly:

       IF condition
              Subsequent lines are assembled only if  condition  evaluates  to
              true (non-zero).

       ELSIF condition
              Subsequent  lines  are  assembled  only  if all preceding IF and
              ELSIF pseudo-ops evaluated to false (zero) and condition  evalu-
              ates to true (non-zero).

       ELSE   Subsequent  lines  are  assembled  only  if all preceding IF and
              ELSIF pseudo-ops evaluated to false (zero).

       ENDIF  Terminate an IF statement.

       Macro definition:

       MACRO  Start defining a macro. The macro's name shall be in  the  label
              field.  Subsequent lines up to the enclosing ENDM pseudo-op will
              not be assembled until the macro is expanded. Macro  definitions
              may be nested; that is, using a macro may define another macro.

       ENDM   Finish a macro definition started with MACRO.

       Inline data:

       FCB value[,value]...
       FCC value[,value]...
              Form  Constant  Byte. Each value is evaluated either to a number
              or a string. Numbers are truncated to 8 bits and stored directly
              as  bytes.  For  strings,  the  ASCII value of each character is
              stored in sequential bytes.

              Historically, FCB handled bytes and FCC (Form Constant Character
              string)  handled strings. asm6809 treats them as synonymous, but
              is rather more strict about what is allowed as a  string  delim-
              iter.

       FCN value[,value]...
              Identical  to  FCC,  but a terminating zero byte is stored after
              the data. Included to increase compatibility with  other  assem-
              blers.

       FDB value[,value]...
              Form  Double Byte. Each value is evaluated to a number, which is
              truncated to 16 bits and stored as two  successive  bytes  (big-
              endian, of course).

       FILL value,count
              Insert count bytes of value. This is effectively the same as the
              two-argument form of RZB with its arguments swapped.

       RZB count[,value]
       ZMB count[,value]
       BSZ count[,value]
              Reserve Zeroed Bytes. Inserts a sequence of count bytes of zero,
              or  value if specified. The two-argument form is effectively the
              same as FILL with its arguments swapped.

              ZMB and BSZ are alternate  forms  recognised  for  compatibility
              with other assemblers.

       Code placement & addressing:

       ORG address
              Sets  the Program Counter--the base address assumed for the next
              assembled instruction. Unless followed by a PUT pseudo-op,  this
              will also be the instruction's actual address in memory. A label
              on the same line will define a symbol with a value of the speci-
              fied address.

       PUT address
              Modify  the  put  address--the Program Counter is unaffected, so
              the assumed address  for  subsequent  instructions  remains  the
              same,  but the actual data will be located elsewhere. Useful for
              assembling code that is going to be  copied  into  place  before
              executing.

       RMB count
              Reserve  Memory  Bytes.  The  Program  Counter is advanced count
              bytes. In some output formats this region  may  be  padded  with
              zeroes, in others a new loadable section may be created.

       SECTION name
       CODE
       DATA
       BSS
       RAM
       AUTO   Switch  to  the named section. The Program Counter will continue
              from the last value it had while  assembling  this  section,  or
              follow the previous section if had not previously been seen.

              Each  of  CODE,  DATA,  BSS, RAM, and AUTO switches to a section
              named after the pseudo-op. They are recognised for compatibility
              with other assemblers.

       SETDP page
              Set  the  assumed value of the Direct Page (DP) register to page
              for subsequent instructions. Any non-negative page is  truncated
              to  8  bits,  or  specify a negative number to disable automatic
              direct addressing.

              See the section on Direct Page addressing for more information.

       Symbols:

       EQU value
              Short for "equate", this must be used with a label and defines a
              symbol  with  the  specified value. This may be any single valid
              argument (e.g. an expression or a string).

       EXPORT name[,name]...
              Each name--either the name of a macro or a symbol--is flagged to
              be  exported.  Exported macros and symbols will be listed in the
              symbols output file, if specified.

       SET value
              Similar to EQU, this must be used with a  label  and  defines  a
              symbol  with  the  specified  value. Unlike EQU, you can use SET
              multiple times to assign different values  to  the  same  symbol
              without error.

       Files:

       END [address]
              Signifies the end of input. All further lines are disregarded.

              Optionally  specifies an EXEC address to be included in the out-
              put, where supported by the output format. An EXEC address spec-
              ified  on  the  command  line  will override any value specified
              here.

       INCLUDE filename
              Includes the contents of another file at this point in assembly.
              The filename argument must be a string, i.e. delimited by quotes
              or / characters.

       INCLUDEBIN filename
              Includes the binary data from filename (which, as  with  INCLUDE
              must be a delimited string) directly.

   Direct Page addressing
       The  6809 extends the zero page concept from other processors by allow-
       ing fast accesses to whichever page is selected by the Direct Page reg-
       ister (DP). An assembler is not able to keep track of what the code has
       set this register to, but the information is useful when deciding which
       addressing  mode  to  use  for  an instruction. The SETDP pseudo-op, or
       --setdp option, informs the assembler that the supplied value is to  be
       assumed  for  DP. Set this to a negative number to undefine it and dis-
       able automatic use of direct addressing (this is the default).

LICENCE
       This program is free software: you can redistribute it and/or modify it
       under  the  terms of the GNU General Public License as published by the
       Free Software Foundation, either version 3 of the License, or (at  your
       option) any later version.

       This  program  is  distributed  in the hope that it will be useful, but
       WITHOUT ANY  WARRANTY;  without  even  the  implied  warranty  of  MER-
       CHANTABILITY  or  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
       Public License for more details.

       You should have received a copy of the GNU General Public License along
       with this program. If not, see <http://www.gnu.org/licenses/>.



asm6809-2.7                      January 2017                       asm6809(1)
